How to Choose a Heat Pump Installer in the UK: 10 Checks Before You Sign (MCS, Grant and Quotes)

The Quick answer: how do you choose a good heat pump installer?

Choose an installer that is MCS certified and a member of a consumer code (RECC or HIES), that carries out a room by room heat loss calculation before quoting, that gives you an itemised written quote with the Boiler Upgrade Scheme grant shown as a separate deduction, and that will service the system afterwards. In England and Wales the Boiler Upgrade Scheme pays up to £7,500 towards an air source heat pump, but only if an MCS certified installer fits it and applies for you. If an installer cannot show you their MCS certificate number or will not put a design and price in writing, move on.

domestic group

At a glance: the 10 checks

CheckWhat good looks likeRed flag
1. MCS certificationCertificate number you can verify on the MCS website“We are working towards it”
2. Consumer codeMember of RECC or HIESNo code, no deposit protection
3. Heat loss calculationRoom by room calculation before the quoteSized by rule of thumb or from your old boiler
4. Itemised quoteUnit, cylinder, radiators, pipework, controls, labour, grant as a separate lineOne lump sum figure
5. Grant handlingInstaller applies and deducts the grant up front, eligibility confirmed in writingAsks you to apply yourself or pay the grant amount first
6. Radiators and cylinderSays which radiators change and why“Your existing radiators will be fine” with no calculation
7. Electrics and networkChecks your supply and handles the network operator notificationIgnores the electrics
8. Building regulationsCan self-certify through a Competent Person SchemeLeaves compliance to you
9. Warranty and servicingClear manufacturer warranty terms and a yearly service offerSilence about servicing
10. No pressureQuote stays open while you compare“Sign today for a discount”

What is MCS certification and why does it matter?

MCS (the Microgeneration Certification Scheme) is the quality standard for small scale renewable installers in the UK, and it is a legal condition of the Boiler Upgrade Scheme grant. The Energy Saving Trust states that the installer must be MCS certified and a member of an approved consumer code such as the Renewable Energy Consumer Code (RECC) or the HIES consumer code. GOV.UK also advises choosing an MCS certified installer if you plan to claim funding, and says you can search for one on the MCS website.

In practice, no MCS certificate means no grant. On a typical £12,000 job that is a £7,500 mistake.

How much does a heat pump cost to install in 2026?

Before any grant, a typical air source heat pump installation in the UK runs from about £10,000 to £14,000 depending on the size and heat loss of the home. After the £7,500 Boiler Upgrade Scheme grant most households pay roughly £3,000 to £7,000, according to 2026 industry guides. Heat Geek quotes a typical system cost of about £12,100, or from about £4,600 after the grant when replacing gas. For a full breakdown, see our guide to air source heat pump costs, grants and what you actually pay.

Situation (England and Wales)GrantNotes
Air source or ground source heat pump, replacing gas or electric heatingUp to £7,500Taken off your quote by the installer
Eligible off gas grid home (oil or LPG) from 21 July 2026 to 31 March 2027Up to £9,000Temporary uplift; check the end date
Air to air heat pump£2,500See our air to air heat pump guide for the eligibility rules

Grant figures from the Energy Saving Trust Boiler Upgrade Scheme page, checked 19 October 2026. The scheme covers England and Wales only. Rules change, so we confirm eligibility in writing on every quote.

What should a good heat pump quote include?

A good quote is itemised, based on a heat loss calculation, and shows the grant as a separate line. Look for:

  • The heat pump unit with make, model and output in kW.
  • The hot water cylinder, including whether a new one is needed.
  • Radiators, listing which ones are being upsized so the house stays warm at the lower flow temperature a heat pump uses.
  • Pipework, controls and electrics, including any consumer unit work.
  • Labour, commissioning and the MCS paperwork.
  • The Boiler Upgrade Scheme grant, deducted as its own line.

Unusually cheap quotes often leave out one of these items, and it comes back as an extra later. If three quotes are close except for one that is thousands cheaper, ask what has been left out.

Do I need a heat loss calculation before the quote?

Yes. A reliable installer sizes your heat pump from a room by room heat loss calculation, not from the size of your old boiler. Too small and the house will not reach temperature on the coldest days. Too big and the pump cycles on and off, which wastes electricity and wears the compressor. A calculation also shows which radiators need to change, which is why it should come before the price, not after. Our Hertfordshire survey process is explained in what a heat pump installer does, step by step.

Who applies for the Boiler Upgrade Scheme grant?

Your installer does. You do not apply yourself. The MCS certified installer submits the application on your behalf and takes the grant off the price before you pay. Ask for written confirmation that your home is eligible before you book. You must own the property, currently have a fossil fuel or direct electric heating system, and not have received previous government heat pump or biomass support at the address.

What questions should I ask a heat pump installer?

GOV.UK suggests asking these before you commit, and we would add a few of our own:

  1. How long will installation take, and how long will I be without heating or hot water? (Typically 2 to 5 days.)
  2. Does my electricity supply need upgrading, and what will that cost?
  3. Can you self-certify the work for building regulations through a Competent Person Scheme?
  4. Which of my radiators will you change, and why?
  5. Will I get an MCS commissioning certificate? (GOV.UK says it should arrive within 10 days of installation. Keep it safe.)
  6. How often does the system need servicing, and does the warranty depend on it?
  7. Who do I call if it is not performing as promised?

How do I check an installer is genuine?

Use the installer search on the GOV.UK find a heat pump installer page, which points to the MCS directory. Check the certificate number, check the company is listed under RECC or HIES, and read recent reviews. Ask to see photos or speak to a past customer with a similar property. Installers should not pressure you to sign quickly or offer a discount for deciding on the day.

Is a local installer better than a national one?

Often, yes, for aftercare. A heat pump needs commissioning, tuning through its first winter and a yearly service. A local team can be on site quickly, knows the housing stock and the local network operator, and is easy to hold to account. In Hertfordshire that means typical 1930s semis, Victorian terraces in Hertford and St Albans, and newer estates in Welwyn Garden City, each with different radiator and insulation needs. National firms can be fine, but check who actually fits and services the unit in your area.

Should I choose a heat pump or stay with a boiler?

That depends on your home, insulation and running costs. Our guide on whether a heat pump is cheaper than a gas boiler walks through the numbers, and the post on whether gas boilers are being banned explains why you do not have to rush. 

Frequently asked questions

How do I find an MCS certified heat pump installer near me?

Search the MCS installer directory linked from GOV.UK, then check the company’s certificate number and consumer code membership. Ask each shortlisted installer for a written quote based on a heat loss calculation.

Do I have to use an MCS installer to get the Boiler Upgrade Scheme grant?

Yes. The installer must be MCS certified and belong to an approved consumer code such as RECC or HIES, and they apply for the grant on your behalf.

How much is the heat pump grant in 2026?

Up to £7,500 for an air source or ground source heat pump in England and Wales, £2,500 for air to air, and up to £9,000 for eligible off gas grid homes from 21 July 2026 to 31 March 2027.

How long does a heat pump installation take?

Most installations take around 2 to 5 days once the design is agreed, although waiting for the network operator or electrical upgrades can add time.

What is a fair price for a heat pump installation?

Roughly £10,000 to £14,000 before the grant and about £3,000 to £7,000 after the £7,500 grant for most homes. Always compare itemised quotes rather than headline prices.

Should I get more than one quote?

Yes. GOV.UK recommends getting quotes from several installers. Three itemised quotes make missing items and over-sized systems easy to spot.

Get a heat pump designed and fitted by local MCS engineers

Domestic Group+ designs and installs air source heat pumps across Hertford, Ware, St Albans, Welwyn Garden City, Hoddesdon, Bishop’s Stortford and north London. We start with a free survey and heat loss calculation, give you an itemised fixed quote and handle the Boiler Upgrade Scheme application for you.

Book your free heat pump survey in Hertfordshire or call 0800 118 2718. Not ready yet? Contact us and we will tell you honestly whether a heat pump suits your home.



Related Post

get in touch

Our team is committed to providing top-notch customer service and we’re always happy to hear from you.